refractory boards and decorative boards-Changzhou Huajiale Decorative Materials Co., Ltd.

Chemical Resistant Laminate

Physicochemical Laminate is widely used in laboratories, medical treatment, education, catering, public facilities and other fields, as laboratory countertops, kitchen workstations, public restroom partitions, wall decorative laminates and other uses.

Changwujiale • Chemical Resistant Laminate

Craftsmanship Creates
The Ideal Space

Chemical Resistant Laminate ( known as Trespa, thermoset laminate), is a high-performance industrial decorative material, the manufacturing process mainly consists of phenolic resin impregnated in multi-layer kraft paper, heat curing at a specific pressure and temperature, resulting in a strong, durable, chemical-resistant, abrasion-resistant, heat-resistant, flame-retardant and easy to clean and maintain composite laminates. Maintenance-friendly composite laminates.

Therefore, Ricochet laminate is widely used in many fields such as laboratories, medical treatment, education, catering, and public facilities as laboratory countertops, kitchen operating tables, public restroom partitions, wall decorative laminates, and other purposes.

High Structural Strength

Due to the close combination of phenolic resin and paper fibers, Ricoh laminate has excellent impact resistance and mechanical strength.

Chemical Resistance

Good resistance to acid and alkali solutions and other common chemicals, suitable for laboratory environments as lab bench tops, etc.

Good Heat Resistance

Ricoh laminate can withstand a certain high temperature, is not easy to deform, and has a certain degree of flame retardancy, will not burn immediately in the event of fire, but slowly charring.

Wear-resistant and Scratch-resistant

High surface hardness, good abrasion resistance, not easy to scratch, suitable for long-term use.

Easy to Clean and Disinfect

Smooth and flat surface, stains are not easy to penetrate, convenient for daily cleaning and disinfection treatment.

Decorative Diversity

Through surface treatment, Ricoh laminates can present various colors and patterns to meet the decorative needs of different occasions.

At the same time, physicochemical laminates are a quality material choice in furniture manufacturing, especially for furniture components that require long-term exposure to water, oil, chemicals and other conditions in harsh environments.

Specification:
1200mm*2400mm / 1200mm*3000mm

General Thickness:
4.5mm-8.5mm

Chemical Resistant Laminate Product Performance

High Quality
• B1 Non-combustible
• Green Environmental Protection
• Anti-bacterial and Anti-mold
Performance Features
Reach B1 level fire prevention standard
Formaldehyde emissions in line with international standards
Anti-bacterial and anti-mold
Enquire Now View Cases
Durable
• Resistant to Abrasion
• Scratch Resistant
• Stain Resistant
Performance Features
Dense structure, strong compression resistance
Abrasion and damage resistance, as good as new, not easy to deform
Enquire Now View Cases
Aesthetics
• Available in Multiple Colors
• Long-lasting Color
Performance Features
Various colors are available, including solid colors, wood grain, stone grain, flower color and other decorative surfaces.
Anti-fading treatment, long-lasting color fixing
Enquire Now View Cases
Convenient
Easy to Clean • Easy to Process
Performance Features
Can be cleaned with water, mild detergent
Short manufacturing cycle and easy installation
Enquire Now View Cases

Care & Maintenance

Cleaning suggestions for fire-resistant board products:

◆ Please use a damp cloth or sponge to clean the surface, and use a mild soap or detergent. Then spray the entire surface with warm water and wipe dry.
◆ For stains that are more difficult to clean, such as coffee or tea, you can use a mild household detergent and baking soda mixed into a uniform paste; use a hard nylon brush to clean the stained area (about 15 to 20 brushing back and forth). Do not scrub excessively to avoid damaging the surface treatment.
◆ For stubborn stains that cannot be cleaned by the above methods, concentrated household bleach or nail polish remover should be used; use a cotton ball soaked in bleach or nail polish remover and gently scrub the stain for 2 minutes; use warm water spray to clean the entire surface and wipe dry with a soft cloth; if the stain gradually disappears and the surface of the fireproof board is not affected, these cleaning steps can be repeated.

Remind:

Prolonged contact of the surface of refractory products with bleaching products will cause discoloration. Therefore, spray the surface after cleaning. If you do not spray, even a small amount of detergent on the surface of refractory products will cause damage. Dry residues may not be visible, but moisture from beverage containers may reactivate them and cause damage and stains. Baking trays and other heating appliances (such as electric frying pans) placed directly on the product surface will damage the product's appearance. Please use an insulating mat or metal rack for placement.

Note:

◆ Do not use acidic or abrasive cleaners, which will damage the surface of fire-resistant board products. Alkaline drainage cleaners will damage the surface of fire-resistant board products. If such cleaners splash onto the surface of the product, they need to be cleaned immediately and rinsed with clean water several times.
◆ Hair, textile and food dyes can cause stains. If such liquids are splashed onto the surface of the product, they must be cleaned immediately with dishwashing liquid or an all-purpose cleaner.
◆ Do not use oven cleaner directly on unprotected worktops. Clean any remaining cleaner immediately and rinse with water several times.
◆ Rust removers contain strong chemicals that can cause damage. If there is any rust remover residue on the surface, please clean it immediately with soda water and rinse it with clean water several times.
◆ Steel wool or other highly abrasive tools will damage the surface of fire-resistant board products. Do not use these tools for cleaning; do not place steel wool on the surface of the product, as it will cause corrosion and stains.
◆ Rust removers contain strong chemicals that can cause damage. If there is any rust remover residue on the surface, please clean it immediately with soda water and rinse it with clean water several times.