The advantages of high pressure laminate cabinets.

1）Multiple color varieties, can simulate various natural or artificial patterns.

2）Good overall effect on the ground after laying.

(3) uniform color and luster, good visual effect.

(4) easy to clean and care. Because the product has many advantages, it is highly respected by consumers, and its market share is gradually rising.

How to judge the high pressure laminate cabinets good or bad: 1.

1、Appearance quality evaluation index

Warpage
    
High pressure laminate cabinets sometimes appear warpage phenomenon, especially the thinner part, because the warpage will lead to the four corners of the floor in the non-identical plane. In order to accurately assess the impact of warpage on the practical application of impregnated adhesive film paper finish three-layer solid wood composite flooring, combined with the actual application of warpage index can be set: the thickness of 3 ~ 12mm warpage shall not exceed 0.5%, the thickness of more than 12mm warpage shall not exceed 0.3%. The test method is: the concave side of the product is placed upward on the horizontal table, and the two opposite corners of the board are connected with fine steel wires, and the maximum chord height is measured with a steel plate ruler, accurate to 0.5mm, and the ratio of the maximum chord height to the diagonal length is the warpage, expressed as a percentage, accurate to 0.1%.


Dimensional specifications and deviations

The specification size index includes specification, assembly method, use place, etc. The size deviation includes thickness deviation, net length deviation of surface layer, net width deviation of surface layer, straight angle, edge straightness, assembling off seam, assembling height deviation, etc.

2、Physical and mechanical properties

The physical and mechanical properties of high pressure laminate cabinets are mainly evaluated in three aspects, including the quality of the finish layer, the quality of the substrate and the overall performance of the composite flooring.


3、Limit of harmful substances

High pressure laminate cabinets harmful substances mainly refers to formaldehyde release. Formaldehyde release mainly from the adhesive used in the gluing between the layers.

The difference between high pressure laminate cabinets and plywood.

1, the choice of materials is not the same. high pressure laminate cabinets selected materials are high density wood veneer after phenolic impregnation and then pressed together, plywood use of wood veneer is more random as long as it can be combined together can be used.

2, processing is not the same, the processing of laminate must be dried and impregnated veneer to achieve maximum density, plywood using wood veneer moisture content as long as it does not exceed the standard can be no rigid requirements.

3, flatness is not the same, the laminate ultimately to achieve the effect of rock solid, because of the hardness of the flatness requirements are very high, plywood warping phenomenon is very common, generally through the post-trimming way to reprocess.